Difference between revisions of "Thermo Fischer"

From SCADACore Knowledge Base
Jump to navigation Jump to search
m (Kchan moved page ThermoFischer to Thermo Fischer without leaving a redirect)
 
(No difference)

Latest revision as of 20:23, 29 April 2020

Thermo Fischer Scientific Documents

Default Modbus Register Assignments for Thermo Scientific AutoEXEC/AutoPILOT PRO Flow Computers:

AE-APP Default Modbus Register Assignments-31

This document provides users with the DEFAULT user list. However, the default registers are not guaranteed to be the same in every install. For more accurate register mapping see document: Retrieving Register List From Thermo Fischer AutoConfig


Retrieving Register List from Thermo Fischer AutoConfig

To see the entire register list for the Thermo Fischer devices using AutoConfig you need to first connect to your device.

Retrieving-Register-List-from-ThermoFischer-AutoConfig.png


Select Full Update

Depending on the number of Data Blocks this could take a few minutes.

Retrieving-Register-List-from-ThermoFischer-AutoConfig-1.png


Select your Entry# and the Modbus Registers and Enron Modbus Blocks will appear on the right.

Retrieving-Register-List-from-ThermoFischer-AutoConfig-2.png


Alternatively there is a "Mouse Over" Feature in AutoConfig that allows users to see the [Table, Base, Offset].

This "Mouse Over" Tells me that the Register for Early Arrival is in Table 65 "Plunger Calculation #4"

This gives me the "Base Address" Of 43901. The "Register" value is 023. If we add that to the base address 43901+023=Register: 43924.